FAQ


Common Questions on Floor Treatments

In most cases the treatment will last much longer than one year. Depending on the place of applications, we provide a warranty of one year or two years that the treated surface will retain an increased coefficient of friction.
No, however, restaurants must use a degreaser to clean their floor because if they don't, grease will build up over time causing the floor to be slippery. Essentially, if the restaurant does not use a degreaser, in just a short time there will be a build-up of grease on the floor and you will be walking on the layers of grease rather that treated floor.
As general rule of thumb, it takes two people two hours to treat one thousand square feet. We apply the chemical during slow times so there is no down time.
On a very high gloss ceramic tile or marble floor you will notice a slight loss of gloss. But for the most part, there will be no change in the appearance. Remember, we treat the entire area, so there is nothing compare the treated floor to once the installation is complete.

Common Questions on Bathtub Treatments

We give a warranty of two years that the treated bathtubs will retain an increased coefficient of friction. We have not added anything to the porcelain or enamel tub itself. The tub now contains an invisible tread design and the Non-Slip has been safely washed away.
No, whatever you liked to use before your Non-Slip treatment, continue to use afterward. However, harsh abrasives such as a scouring pad should never be used, even on untreated tubs.
No, it will be the same. In the case where people previously were using strips or mats, the cleaning job will be easier after a Non-Slip treatment.
No, because there is no chemical remaining on the bathtub. This is not a coating or a sealer. Once the chemical has been applied, it is neutralized and rinsed down the drain. What remains is a quality of Non-Slip surface.